shakelib.gmice.gmice¶
- class shakelib.gmice.gmice.GMICE[source]¶
Bases:
ABC
Base class called to implement ground motion intensity conversion equations (GMICE).
Inherited by AK07, Wald99, WGRW12.
- getMinMax()[source]¶
Get the minimum and maximum MMI values produced by this GMICE.
- Returns:
Tuple of min and max values of GMICE.
- getScale()[source]¶
Get the name of the PostScript file containing this GMICE’s scale.
- Returns:
Name of GMICE scale file.
- getPreferredMI(df, dists=None, mag=None)[source]¶
Function to compute macroseismic intensity from the preferred ground-motion intensity. The function uses PGV by default, but this may be overridden by individual classes.
- Parameters:
- Returns:
ndarray of Modified Mercalli Intensity and ndarray of dMMI / dln(amp) (i.e., the slope of the relationship at the point in question).
- getPreferredSD()[source]¶
Return an array of standard deviations for the preferred ground-motion to MMI conversion. Return None is the preferred IMT is not in the list of available IMTs for the GMICE.
- Returns:
Array of GM to MI sigmas (in MMI units).
- Return type:
(numpy array)
- abstract getMIfromGM(amps, imt, dists=None, mag=None)[source]¶
Function to compute macroseismic intensity from ground-motion intensity. Supported ground-motion IMTs are PGA, PGV and PSA at 0.3, 1.0, and 2.0 sec periods.
- Parameters:
amps (ndarray) – Ground motion amplitude; natural log units; g for PGA and PSA, cm/s for PGV.
imt (OpenQuake IMT) – Type the input amps (must be one of PGA, PGV, or SA). Supported SA periods are 0.3, 1.0, and 3.0 sec. [link] <http://docs.openquake.org/oq-hazardlib/master/imt.html>
dists (ndarray) – Numpy array of distances from rupture (km).
mag (float) – Earthquake magnitude.
- Returns:
ndarray of Modified Mercalli Intensity and ndarray of dMMI / dln(amp) (i.e., the slope of the relationship at the point in question).
- abstract getGMfromMI(mmi, imt, dists=None, mag=None)[source]¶
Function to tcompute ground-motion intensity from macroseismic intensity. Supported IMTs are PGA, PGV and PSA for 0.3, 1.0, and 3.0 sec periods.
- Parameters:
mmi (ndarray) – Macroseismic intensity.
imt (OpenQuake IMT) – IMT of the requested ground-motions intensities (must be one of PGA, PGV, or SA). [link] <http://docs.openquake.org/oq-hazardlib/master/imt.html>
dists (ndarray) – Rupture distances (km) to the corresponding MMIs.
mag (float) – Earthquake magnitude.
- Returns:
Ndarray of ground motion intensity in natural log of g for PGA and PSA, and natural log cm/s for PGV; ndarray of dln(amp) / dMMI (i.e., the slope of the relationship at the point in question).